47 Carrington Road
Marrickville NSW 2204
Categories Wellbeing Soap Making Melt and Pour Soap Clear - Melt and Pour Soap 1 Kg Melt And Pour Soap Clear
Product Description
Ingredients: Purified Water, Glycerine, Sodium Stearate, Sorbitol, Propylene Glycol, Sodium Laurate, Sodium Laureth Sulfate, Sodium Lauryl Sulfate, Sodium Chloride, Stearic Acid, Lauric Acid, Pentasodium Pentetate, Tetrasodium Etidronate
Melt & Pour glycerine is soap is made with approx. 20 % white soap and 80% vegetable glycerine. The white soap originally has sodium hydroxide (lye is produced when sodium hydroxide is mixed with water) as an emulsifier (to bond the oils and the water).
The white soap is then cured for 3-4 weeks during which time the lye reacts with fatty acids and becomes inert. During the curing process the lye dissipates and the total residue in the final product is only approx. 0.1%.
Getting Started:
1. Melt and Pour soap is already reasonably soft, so it doesn't take long to melt, either in a microwave or over a double boiler on the stove. (Remember if you do not have access to a double boiler then a large saucepan part filled with water with a smaller pot resting on some forks in the bottom of the larger pot will suffice).
2. Colour is to be added at this stage. Food colours can be used if lighter shades are required, however too much will result in the final product staining your hands. For stronger cooured soaps oil soluble based colours are preferential.
3. During this step the scent is added. Both essential and fragrant oils can be used according to preference. The ratio can vary according to the potency of the oils and the desired end product (the essential oils being the strongest). We recommend that you try about 1 tablespoon per 500g of melt and pour soap.
4. At this stage you can customize your soap with various additives. We recommend you experiment with carrier oils (such as almond), you can add up to 5%; or raw materials such as aloe vera, vitamin E, crushed plant material (jojoba or sandalwood) or ground pumice stone, you can add up to 2%.
5. Pour your mixture into a mold (molds can be as simple as a tupperware container or jelly mold) and leave to set.
6. Once your soap has hardened it is ready to use and enjoy!
The white soap is then cured for 3-4 weeks during which time the lye reacts with fatty acids and becomes inert. During the curing process the lye dissipates and the total residue in the final product is only approx. 0.1%.
Getting Started:
1. Melt and Pour soap is already reasonably soft, so it doesn't take long to melt, either in a microwave or over a double boiler on the stove. (Remember if you do not have access to a double boiler then a large saucepan part filled with water with a smaller pot resting on some forks in the bottom of the larger pot will suffice).
2. Colour is to be added at this stage. Food colours can be used if lighter shades are required, however too much will result in the final product staining your hands. For stronger cooured soaps oil soluble based colours are preferential.
3. During this step the scent is added. Both essential and fragrant oils can be used according to preference. The ratio can vary according to the potency of the oils and the desired end product (the essential oils being the strongest). We recommend that you try about 1 tablespoon per 500g of melt and pour soap.
4. At this stage you can customize your soap with various additives. We recommend you experiment with carrier oils (such as almond), you can add up to 5%; or raw materials such as aloe vera, vitamin E, crushed plant material (jojoba or sandalwood) or ground pumice stone, you can add up to 2%.
5. Pour your mixture into a mold (molds can be as simple as a tupperware container or jelly mold) and leave to set.
6. Once your soap has hardened it is ready to use and enjoy!
Disclaimer
New Directions Australia Pty Ltd. does not supply food grade raw materials and therefore cannot waive GST.
Prior to use: Customers should always refer to the Material Safety Data Sheet / Specification Sheet OR the ingredients label as affixed to each product which are current at the time of supply of the product.
The information provided is for educational purposes only. Individuals receiving this information must exercise their independent judgment in determining its appropriateness for a particular purpose or use.
As the ordinary or otherwise use(s) of products is outside the control of New Directions Australia Pty Ltd., no representation or warranty, expressed or implied, is made as to the effect(s) of such use(s), (including damage or injury), or the results obtained. New Directions Australia Pty Ltd. expressly disclaims responsibility as to the ordinary or otherwise use(s). Furthermore, nothing contained herein should be considered as a recommendation by New Directions Australia Pty Ltd. as to the fitness for any use. The liability of New Directions Australia Pty Ltd. is limited to the value of the goods and does not include any consequential losses.New Directions Australia Pty Ltd. shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.
New Directions Australia Pty Ltd. shall not be responsible for any damages resulting from use of or reliance upon this information.
The user of the product is solely responsible for compliance with all laws and regulations applying to the use of the products, including intellectual property rights of third parties.
The products contained in this website are represented in as true a manner, as photographic processes and printing will allow. The images contained in this website are for illustrative purposes only. If you have any questions with regard to how products are packaged or labeled, please contact your account manager at our Marrickville Head Office.
As the availability of ingredients and raw materials is not always certain whether due to changes in nature or otherwise, New Directions Australia Pty Ltd. reserves the right to substitute alternate ingredients/raw materials in the manufacture of its products and bases in order to maintain supply to its customers.
New Directions Australia Pty Ltd. is a wholesaler of natural skin care products and natural raw materials. If you intend to re-label our products under your own name/ brand for the purpose of on-selling or retailing, we strongly recommend that you keep up to date with constant changing labeling laws. Please visit www.accc.gov.au or www.nicnas.gov.au . New Directions Australia Pty Ltd. cannot be held responsible for consequential loss/ product recall due to incorrect labeling.
Note: Individuals receiving any information contained in this website must exercise their independent judgment in determining its appropriateness for a particular purpose or use. As with any manufacturing process, New Directions encourages small, lab-scale manufacturing for evaluation purposes prior to full commercial manufacturing.